Available with 3/8" NPT, 1/2" Flaretek, or
1/2" ANSI flange liquid connections
Maximum flow up to 6.0 gallons/minute
End-user maintainable
Self-priming
Field-proven design
Clean room manufactured, DI water tested,
nitrogen purged, and double bagged
Ball or flat check valves available
Pump Material
Casing
PTFE
Manifold
PTFE
Body (non-wetted)
Polypropylene
Check Valve
Ball or Check Valves available.
Flat check valve is recommended for increased flow (up to 5%) and suction lift applications. Ball check valve is recommended for flooded suction or viscous liquids.
Discharge Volume/Cycle
0.017 gal (65cc)
Maximum Cycles/Minute
250
Port Dimensions
Liquid Inlet & Discharge
1/2" Flaretek or
1/2" ANSI flange 150# or
3/8" NPT
Air Inlet
Female 1/4" NPT
Air Exhaust (with muffler)
Female 3/8" NPT
Air Supply Pressure
20 to 100 PSI (1.4 to 7 kgf/cm2)
Maximum Liquid Temperature
176° F (80°C)
-- 212° F (100°C) option available,
consult Yamada --
